|
 Low Cost, 2-Wire, 4-20 mA Transmitters for pH Interface to PLC and Dataloggers
|
For low cost signal conditioning, Sensorex is pleased to offer low cost, True 2-wire 4-20 mA pH transmitters. Use these to interfacing a pH electrode output into your PLC, datalogger, or any other 4-20mA input device. For economy reasons, Both models are "blind". Choose the lower cost non-isolated PHMA,
or the EMIT-pH for input to output isolation. Power supply required is 12-36 VDC.
|
Model
|
Size
|
Type
|
| SG200C |
12mm X 150mm |
Sealed General Use |
| SG201C |
12mm x 150mm |
Refillable |
| SG200CD |
12mm x 150mm |
Sealed Dbl Junction |
| SG300C |
9.5mm x 300mm |
Sealed Long & Thin |
| SG301C |
9.5mm x 300mm |
Refillable |
| SG900C |
6mm x 150mm |
Sealed Semi-Micro |
| SG901C |
6mm x 150mm |
Refillable |
| SG360CD |
12mm x 150mm |
Flat Double Junction |
|
| Product Features |
| |
True 2-Wire Design
|
| |
Low Cost
|
| |
Non-Isolated 4-20 mA Transmitters
|
| |
Isolated 4-20 mA Transmitters
|
| |
Provide OPTIMUM Service Life
|
|
| |
|
All of our laboratory electrodes are supplied with a 30" cable (76 cm), soaker storage bottle or soaker cap, and a BNC connector at no additional charge. Many other connectors are available, some of them for a modest additional charge. Special cable lengths are readily available at additional charge.
Our selection guide will assist you in choosing the appropriate electrode to meet your specific requirements. Should you have any questions, or require additional assistance, please contact Sensorex.
|
